15.HX
Hydrocarbon
Extractor
15.HX
Hydrocarbon
Extractor
PROFESSIONAL SCALE



VERSATILEHYDROCARBON EXTRACTION
Meet the 15.HX – the all-new closed-loop, passive recovery hydrocarbon extraction system. Capable of processing up to 15 lbs. biomass per run. That’s 30 lbs. an hour.
This powerhouse is loaded with features such as fully jacketed material columns with precise temperature control, mobile solvent tanks for incredible flexibility, and integrated load sensors that replace a C1D1 scale. From the ground up, the 15.HX gives you full control to create an award-winning finished product.
Jacketed
Everything
The 15.HX goes above and beyond – with fully jacketed material columns, solvent vessels & surge tanks – giving you precise temperature control. External chillers can be operated safely from a touchscreen interface inside the booth. Integrated temperature sensors and -60°C cooling create the perfect conditions for producing high terpene, high cannabinoid products.
Better control, Better extract.

Lifetime
Warranty
When we design – we have you in mind, That’s why the 15.HX is constructed in the USA using the highest quality materials, resulting in the highest quality equipment on the market. Crafted from scratch with domestic stainless steel, every inch of the 15.HX is designed with the utmost care, and backed by a Lifetime Warranty.

Lifetime
Warranty
When we design – we have you in mind, That’s why the 15.HX is constructed in the USA using the highest quality materials, resulting in the highest quality equipment on the market. Crafted from scratch with domestic stainless steel, every inch of the 15.HX is designed with the utmost care, and backed by a Lifetime Warranty.
Lifetime
Warranty
When we design – we have you in mind, That’s why the 15.HX is constructed in the USA using the highest quality materials, resulting in the highest quality equipment on the market. Crafted from scratch with domestic stainless steel, every inch of the 15.HX is designed with the utmost care, and backed by a Lifetime Warranty.

Seamless Control
From internal temperature probes, chiller, and vacuum control to load sensors that replace a C1D1 scale – the 15.HX gives you complete control over your system from an explosion-proof touchscreen inside the extraction booth.


Seamless
Control
From internal temperature probes, chiller, and vacuum control to load sensors that replace a C1D1 scale – the 15.HX gives you complete control over your system from an explosion-proof touchscreen inside the extraction booth.
Seamless
Control
From internal temperature probes, chiller, and vacuum control to load sensors that replace a C1D1 scale – the 15.HX gives you complete control over your system from an explosion-proof touchscreen inside the extraction booth.

SPECIFICATIONS
EQUIPMENT | ![]() |
---|---|
Dimensions (approx.) | 82” Lx32” Wx70” H |
Working Area: | 75 ft.² |
Vacuum | Welch CRVPro 8 Explosion Proof |
Warranty** | Lifetime Warranty against pitting or corrosion. Gauges, gaskets, valves 1 Year |

TECHNICAL | ![]() |
---|---|
Solvents | Butane, Propane, Isobutane |
Solvent to Biomass | 5:1 |
Recovery Method | Passive |
Cycle Time | Approx. 30 minutes (Note: Runtimes vary according to factors such as
solvent blend, operating temps, solvent to material ratio, other factors) |
Capacity | 200+ lbs. per 8 hour shift |
Solvent Recovery Rate | 3–5 lbs. per minute |
Peer Reviewed | Pressure Safety Inspectors |
Certifications | Meets or exceeds all industry listed standards for: ASME Section VIII, GMP, IFC 3904.4, NFPA 1: 38.6.1.5.6.1, 3-A Sanitary Standard, Class 1 Division 1, NSF and UL21. C1D1 |
Highlights
- Fully jacketed material columns and solvent vessels
- In-line CRC with 85 lbs. surge tank
- Falling film recovery up to 3–5 lbs./min.
- Built-in molecular sieves for moisture removal
- Secondary access ports allow for distillation of solvents, rapid depressurization in case of emergency, and continuous flow processing
- Integrated solvent tank load sensors eliminate the need for C1D1 scale
- Internal temperature probes and C1D1 gauges enable precise temp monitoring and control
- On-site installation and training included
- Peer reviewed, 50 state compliant, C1D1 compliant, ASME certified
Highlights
- Fully jacketed material columns and solvent vessels
- In-line CRC with 85 lbs. surge tank
- Falling film recovery up to 3–5 lbs./min.
- Built-in molecular sieves for moisture removal
- Secondary access ports allow for distillation of solvents, rapid depressurization in case of emergency, and continuous flow processing
- Integrated solvent tank load sensors eliminate the need for C1D1 scale
- Internal temperature probes and C1D1 gauges enable precise temp monitoring and control
- On-site installation and training included
- Peer reviewed, 50 state compliant, C1D1 compliant, ASME certified
Highlights
- Fully jacketed material columns and solvent vessels
- In-line CRC with 85 lbs. surge tank
- Falling film recovery up to 3–5 lbs./min.
- Built-in molecular sieves for moisture removal
- Secondary access ports allow for distillation of solvents, rapid depressurization in case of emergency, and continuous flow processing
- Integrated solvent tank load sensors eliminate the need for C1D1 scale
- Internal temperature probes and C1D1 gauges enable precise temp monitoring and control
- On-site installation and training included
- Peer reviewed, 50 state compliant, C1D1 compliant, ASME certified
DOWNLOAD OUR FREE
15.HX
HYDROCARBON
EXTRACTOR SPEC SHEET
DOWNLOAD OUR FREE
15.HX
HYDROCARBON
EXTRACTOR SPEC SHEET

