40HX
Hydrocarbon
Extractor
40.HX
Hydrocarbon
Extractor
Commercial Scale
PRECISIONAT YOUR FINGERTIPS
Discover the Future of Hydrocarbon Extraction at scale with the 40.HX. Our advanced closed-loop, passive recovery hydrocarbon extractor is designed to handle up to 40 lbs. of biomass per run, ensuring efficient processing for your needs.
Experience precision like never before with the fully jacketed system equipped with internal temperature sensors and C1D1 tablet control, enabling precise cooling down to -60°C. Designed for 2 runs per hour at a 5:1 solvent to biomass ratio, 40.HX boasts seamless, continuous processing using the inline CRC and stainless steel surge tank.
Achieve unparalleled terpene and cannabinoid selectivity through precise temperature control. Enjoy the benefits of a fully jacketed system with internal temperature sensors, inline CRC column, and 150 lbs. surge tank. The built-in molecular sieves ensure moisture removal from fresh frozen material, while secondary access ports offer versatility for distillation, depressurization, and continuous flow processing. PSI peer-reviewed, 50-state compliant, ASME certified, UL. Onsite training and installation service available.
SPECIFICATIONS
EQUIPMENT |  |
|---|---|
Dimensions (approx.) | 19’L x 3’4″D x 8’9”H |
Working Area: | 140 ft.2 |
Vacuum | Welch CRVPro 16 Explosion Proof |
Warranty** | Lifetime Warranty against pitting or corrosion. |
TECHNICAL |  |
|---|---|
Solvents | Butane, Propane, Isobutane |
Solvent to Biomass | 5:1 |
Recovery Method | Passive |
Cycle Time | Approx. 30 minutes (Note: Runtimes vary according to factors such as solvent blend, operating temps, solvent to material ratio, other factors) |
Capacity | Approx. 40 lbs. |
Solvent Recovery Rate | 8 – 12 lbs. per minute |
User Interface | C1D1 explosion-proof touchscreen tablet |
Peer Reviewed | Pressure Safety Inspectors |
Certifications | Meets or exceeds all industry listed standards for: ASME Section VIII, GMP, IFC 3904.4, NFPA 1: 38.6.1.5.6.1, 3-A Sanitary Standard, Class 1 Division 1, NSF, UL21 & C1D1. |
Highlights
- Fully jacketed material columns and solvent tank with internal temperature sensor for precise cooling.
- Inline CRC column with 150 lbs. surge tank
- Falling Film solvent recovery 8 - 12 lbs. / min.
- Built-in molecular sieves for moisture removal
- Secondary access ports allow for distillation to purify solvent, rapid depressurization in case of emergency, and continuous flow processing
- Integrated solvent tank load sensor replaces C1D1 scale
- Onsite training and installation service
- PSI peer-reviewed, 50 state compliant, ASME certified, UL
Highlights
- Fully jacketed material columns and solvent tank with internal temperature sensor for precise cooling.
- Inline CRC column with 150 lbs. surge tank
- Falling Film solvent recovery 8 – 12 lbs. / min.
- Built-in molecular sieves for moisture removal
- Secondary access ports allow for distillation to purify solvent, rapid depressurization in case of emergency, and continuous flow processing
- Integrated solvent tank load sensor replaces C1D1 scale
- Onsite training and installation service
- PSI peer-reviewed, 50 state compliant, ASME certified, UL
Highlights
- Fully jacketed material columns and solvent tank with internal temperature sensor for precise cooling.
- Inline CRC column with 150 lbs. surge tank
- Falling Film solvent recovery 8 – 12 lbs. / min.
- Built-in molecular sieves for moisture removal
- Secondary access ports allow for distillation to purify solvent, rapid depressurization in case of emergency, and continuous flow processing
- Integrated solvent tank load sensor replaces C1D1 scale
- Onsite training and installation service
- PSI peer-reviewed, 50 state compliant, ASME certified, UL
DOWNLOAD OUR FREE
40.HX
HYDROCARBON
EXTRACTOR SPEC SHEET
DOWNLOAD OUR FREE
40.HX
HYDROCARBON
EXTRACTOR SPEC SHEET
EU-GMP Lab Design
Decimal can design a pharma grade facility that meets all of your requirements
EU-GMPLAB DESIGN
Decimal can design a pharma grade facility that meets all of your requirements
EU-GMPLAB DESIGN
Decimal can design a pharma grade facility that meets all of your requirements